| |
|
|
| |
DA 1505, 1506, 1507 - Copper Flashing |
|
| |
DA 1505 Copper Fabric Thru-Wall Flashing
is coated on both sides with asphalt and bonded between two layers of fiberglass.
DA 1506 Copper Kraft Duplex Flashing is copper sheet laminated
with asphalt and Kraft paper on each side.
DA 1507
Copper Coated Thru-Wall Flashing is copper sheet coated on both sides with a polymer modified asphalt compound.
|
|
| |
DA 213 - Seismic Veneer Anchor Plates |
|
| |
Fabricated from a fiberglass/Mylar
and a black composite polyester film.
Packaged in 300 linear ft. rolls.
Designed as a through-wall composite
flashing. |
|
| |
DA 1544 - Dur-O-Barrier Thru-Wall Flashing |
|
| |
Fabricated from 32 mils of rubberized asphalt and 12 mils of high
density cross-laminated polyethylene film.
Packaged 225 sq. ft. per carton. Each
roll has 75 linear feet.
Designed as a through-wall composite flashing which is self-sealing, self-healing, and
fully adhered. |
|
| |
DA 1525 - Drip Edge Stainless Steel Flashing |
|
| |
Fabricated
from 26 gauge stainless steel.
Standard 1‑1/2 inch wide, 3/8 inch closed hemmed edge.
Standard 8 ft. lengths.
Packaged per order. Designed
as a water drip to use with through-wall flashing such as DA 1544 Dur‑O‑Barrier Flashing and DA 1501 DCF Flashing.
|
|
| |
|
|
| |
Concealed
moisture barrier.
Self-sealing and fully-flexible Roll size is 150 lineal ft. for 20 and 30 mil, 100 lineal ft. for
56 mil.
Stock or cut to order. May be applied to masonry, concrete, steel, gypsum, or wood. |
|
| |
|
|
| |
Standard
translucent plastic.
Standard size 3/8 inch outside diameter.
Lengths available in 4 and 8 inches.
Packaged
1,000 pcs. per carton for 4 inch lengths. Packaged 500 pcs. per carton for 8 inch lengths. Designed to be placed in the head
joints in the flashing course to allow moisture to exit cavity. |
|
| |
|
|
| |
Standard
size 3/8 x 2‑1/2 x 3‑3/8 inches
Jumbo size 3/8 x 3‑5/8 x 3‑5/8 inches
Standard clear
Packaged 150 pcs. per carton Designed to be placed in head joints in flashing course to weep and vent the cavity. |
|
| |
|
|
| |
Fabricated
from white corrugated poly-propylene co-polymer plastic.
Standard 16 inch lengths, width to fit width
of
air cavity. Packaged 150 pcs. per carton.
Designed to control mortar droppings to insure clear
air spaces in cavity walls. |
|
| |
|
|
| |
Fabricated from either high density polyethylene
or recycled polyester.
Each piece is 10 inches wide and 5 feet long. Packaged 100 linear feet per carton.
Designed to control
mortar droppings to insure clear air spaces in cavity walls. |
|
| |
|
|
| |
Fabricated from high density polyethylene.
Each roll is 10
inches wide and 50 linear feet long.
One size accommodates all air cavities.
Designed to control
mortar droppings to insure clear air spaces in cavity walls. |
|
| |
DA 2016 - Dur-O-Barrier Tape |
|
| |
Standard 30 mil with a release coated disposable backing.
Fabricated
4 inch wide, 100 ft. length rolls, 6 rolls per carton.
Designed to be placed
behind veneer anchor plates or straps against sheathing to minimize moisture penetration. |
|
| |
DA 1510 - Termination Bar |
|
| |
Standard finish is stainless steel.
Standard 1/8 inch thick,
1‑1/2 inch wide, 8 foot length. Hole placement 8 inch on center
with 4 inch edges - H.B. is 16" oc.
Packaged per order. Designed to mechanically attach flashing edge to a
backup structure.
|
|
