This product is designed to control
movement in masonry walls. It is intended for use in concrete masonry walls. The shear keys are designed to fit the sash grooves
in the block.
DA 2002, 2004, 2006, 2007 & 2020 - PVC Control Joint
This product is designed to control movement in masonry walls. It is intended for use
in concrete masonry walls. The shear keys are designed to fit the sash grooves in the block.
DA 2010 - Soft Joint
Material is closed cell Neoprene Rubber Standard size 1/4 x
2‑3/4 inches Adhesive is on one side with a release coated disposable backing. Packaged 50 ft. rolls
This product is
designed to accommodate differential vertical movements in brick veneer, adheres to the bottom side of lintel or shelf angle.
DA 2015 - Expansion Joint
Material
is closed cell Neoprene Rubber Standard size 3/8 x 3 inches Packaged 50 ft. rolls
This product is
designed to accommodate horizontal expansion in brick.
DA 2200 - Joint Stabilizing Anchor
Mill
Galv. or Stainless Steel Fabricated with 1/32 inch sheet steel sleeves and two 8 gauge wires Packaged 100 pcs. per
carton
This
versatile product is designed to allow movement at expansion, contraction or isolation joints in masonry.
DA 411 - Wall Top Stabilizing Anchor
Fabricated
from a 2 x 5 inch plate of 12 gauge steel and a welded 3/8 x 6 inch dowel and includes a plastic sleeve. Packaged 50
pcs. per carton
This
product is designed to resist lateral loads at the top of masonry walls.
DA 5610 - Expansion Anchor Fasteners
For
use with Wall Top Stabilizing Anchor Requires 2 fasteners for each Wall Top Stabilizing Anchor
Expansion Anchors
for attachment to concrete or any masonry material.
